Nishibe Kikai's Web Site
Top -> Machine Model -> HSE-600-SPG ZIPPER 3-SIDE SEAL POUCH MAKING MACHINE
3-SIDE SEAL POUCH MAKING MACHINE
CENTER PRESS SEAL POUCH MAKING MACHINE
CENTER SEALING MACHINE
AND
CUTTING MACHINE
SPECIAL MACHINE
RELATED EQUIPMENTS




Copyright(c) 1997
NISHIBE KIKAI CO.,LTD.
All Rights Reserved


>>Japanese

HSE-600-SPG
ZIPPER 3-SIDE SEAL POUCH MAKING MACHINE
Very stable production with 3 computer controlled servo motors Superior quality seals, precise web feed, and easy operation.
HSE-600-SPG
>> General Structural Diagram (PDF documents)

* This file is stored in PDF format which requires Adobe Acrobat Reader for viewing.
If you do not have Acrobat Reader installed on your computer, click this banner to install.


Characteristics

Due to the use of computer controlled servo motors for film feeding and sealing machanisms it is possible to produce pouches with optimal conditions for each product. Sealing time remains constant independent of running speed.

* Multi-function for easy operation *

  1. Voluntary setting and fixing of sealing time
  2. User-friendly touch screen
  3. Auto tuning sensor for cutting length control
  4. Lift-up function of sealing units during machine stoppage
  5. Table conveyor with height adjustment
  6. Alarms and auto stop function when web finishes. Yard meter(total feeding length)

Specifications
Production Speed Zipper 3-side seal pouch: 30-120 cycles/min.
3-side seal pouch: 30-160 cycles/min.
* The production speed may be affected by the type of material and the cutting length.
Film size range W = 400mm-1250mm Diameter 800mm
Pouch size range 3-side seal pouch: W=75mm-600mm L=50mm-500mm
Zipper 3-side seal pouch
    1-lane production: W=80mm-250mm L=200mm-550mm
    2-lane production: W=80mm-250mm L=100mm-275mm
Machine weight 10000kg (Approx.)

Main Web Stand Horizontal Single Web Stand
Main Web Shaft 3-inch Air Shaft
Main Web Brake Automatic Control by value input
L.P.C. Mitsuhashi Line Position Controller
Zipper Reel Stand 2 units

Zipper Sealing and
Cooling Unit
Heater (L:520mm), Cooling Unit(L:250mm)
Longitudinal Sealing Unit Heater (L:620mm) : 4pcs.(W:80/50/50/80mm), Rubber Base
Longitudinal Cooling Unit Cooling Bar (L:520mm) : 4pcs.(W:70/30/30/70mm), Rubber Base
Razor Unit at the middle feed roller Razor Holder : 1pc., Trimming Guide
Side Sealing Unit 5units (Point Sealing Unit/ 3units)
Side Cooling Unit 2units
Razor Unit at the front feed roller Razor Holder : 4pcs., Trimming Guide
Monitor Touch Screen
Table Conveyor Up and down movement (Separate type)
Thermostat 20 pcs., Upper and lower limit warning
Alarms Start Discharge, Web Run Out, Web End, Web Splice, Zipper Splice
Accessories Guillotine knives : 1set, Seal Bar (Longitudinal / Bottom) : 20pcs., Tools : 1set
Option Second Stage Unwinder
2-roll Feeding System
Floor Pick Up
NIRECO Tension Controller
Accumulator
Ultrasonic Sealing Device For Zipper Point Sealing
Water Cooling Type Zipper Guide Plate
Skip Drive
Powder Sprayer
Punching Unit
In-line Corner Punching Unit
Evacuation Unit
Twin Cutter
Cutter Controller

Power AC200V 3P Motor load 16kW, AC200V heater load 41kW
Cooling water 10-15 liters/min.
* Operating system is Windows XP.
* The above values and the configuration may be changed for improvement without previous notice.
* Machine specifications are slightly defferent from Japanese ones. Please ask our sales staffs for details.